Contax SW II - REV 4.01 Guia do Utilizador descarregar pdf (Página 3)

AT-S73, AT-S99 and AT-S102 Version 4.0.1 Software Release Notes

PN 613-001136 Rev. B 3 Allied Telesis Inc.

Product Documentation

Refer to the Allied Telesis web site at www.alliedtelesis.com for the latest installation and user guides for

the Converteon product line.

What’s New in Version 4.0.1

This release adds support for these new media converter line cards:

The new line cards ship with the AT-S102 Version 4.0.1 Management Software and do not need to be

updated.

The AT-CV1203 Chassis has been updated. The new version can support the OAM-based first RPS

failure signal on the AT-CM3 Line Cards without the need of a management card. For further information,

refer to the latest version of the AT-S73, AT-S99, and AT-S102 Management Software User’s Guide.

Some changes have been made to the menus and the web browser windows in this version of the AT-S99

Management Software for the AT-CV5M02 Management Card. For further information, refer to the

AT-S73, AT-S99, and AT-S102 Management Software User’s Guide.

Upgrading the AT-CV5M02 Management Card and the AT-CM2 and

AT-CM70S Media Converter Line Cards to Version 4.0.1 from Version 3.0.0

or 4.0.0

Please review the following information before you begin the upgrade procedure:

 Allied Telesis recommends updating the AT-S73 Management Software on the AT-CM2 and

AT-CM70S Line Cards before updating the AT-S99 Management Software on the AT-CV5M02

Management Card. If the management card already has Version 4.0.1, it still may be possible to use it

to update the line cards. However, if you encounter problems, you may have to download Version 3.0.0

of the AT-S99 Management Software onto the management card, update the line cards, and then

reinstall Version 4.0.1 on the management card.

 This procedure uses TFTP to download the new software to the line cards. As an alternative, you can

use XMODEM. For instructions, refer to the AT-S73, AT-S99, and AT-S102 Management Software

User’s Guide.

Model Name Ports

AT-CM301 One 10/100Base-TX twisted pair port with a RJ-45 connector

and a 100Base-FX fiber optic port with a duplex ST connector

and a maximum operating distance of 2 kilometers (1.24

miles).

AT-CM302 One 10/100Base-TX twisted pair port with a RJ-45 connector

and a 100Base-FX fiber optic port with a duplex SC connector

and a maximum operating distance of 2 kilometers (1.24

miles).

AT-CM3K0S One 10/100/1000Base-T twisted pair port with a RJ-45

connector and a slot for a 100Base-FX or 1000Base-X SFP

module.

1 2 3 4 5 6 7 8 ... 16 17

Sem comentários

Contax SW II - REV 4.01 Guia do Utilizador Página 3